The Memo Wave is a unique Digital Video Event Recorder that records images on a removable Multi-Media Card. It allows the user to have a three camera video surveillance system with alarm trigger capabilities controlled by remote PC, at an affordable price.
Recordings can be triggered by a PIR, contact switch or video motion detection. Single snapshots can be recorded using an external remote control or by PC command.
Specifications
• Three CCIR, EIA B/W camera video inputs
• Video out for monitor (local)
• Timed relay for activation of external devices
• 16MB MMC - records up to 1,400 images
• 128MB MMC - records up to 12,000 images
• RS485 Connection – View & manages images from PC without removing the MMC
• Connect up to 31 units
• External IR receiver (optional)
• Pre-alarm recording
• Multi-camera support
• Arm/disarm by remote control unit or by one of the inputs
• Provision for a rechargeable backup battery
• Infrared camera-ready
Software Features
• Three inputs – can be defined by the user as external triggers
• Automatic recording upon triggered event
Two Recording Modes
• Fixed - Records events until the MMC is full & stops
• Cyclic - Records events successively, overriding old data when the MMC is full (FIFO)
User Programmable Settings
• Frame rate
• Number of frames per event
• Relay activation (N/O or N/C)
• External trigger (N/O or N/C)
Image Integrity/Watermark Protection
• Each image is digitally signed & can be authenticated
• Scheduling arm/disarm unit at any day/time
Video Motion Detection
• Define specific areas of interest within the picture frame & select sensitivity levels to trigger recording on one camera |
