The MemoCam Mobile is a Covert Digital Video Recorder with removable memory card, camera and PIR all-in-one. It is designed for situations where mains power is not readily available.
Internal B&W CCD Camera
Superb 420 TV line quality
Records images to its own memory card (3 images per second to 5 images per minute). Memory card can then be downloaded onto your PC
Built-in PIR
Images are stored as tamper proof EVT files, allowing submission as evidence
2 Video inputs for additional external cameras
1 Video output for real time monitoring
Stores up to 20000 B&W images on 128MB MultiMedia Card
Allows pre-defined recording times
Requires simple electrical skills to install
Various battery options available depending on length of recording time required.
View & playback of recorded video images
Remote Control unit
The MemoCam Mobile automatically records events on the Memory Card following an alarm. The alarm can be activated by external triggers and/or by the internal PIR detector.
The recorded events are easily analyzed by simply removing the Memory Card from the unit and inserting it into a Memory Card Reader connected to a PC. The remote control unit enables the user to Arm/Disarm the event recording process or record events manually.
Adding 2 external cameras, converts the unit into a multiple camera CCTV system, significantly reducing the cost per video input.
The Video Output enables the user to view live video from a selected camera when connected to a CCTV monitor.
This feature simplifies the camera adjustment process and provides additional monitoring capability.
The built-in weekly Scheduler enables the user to automatically Arm/Disarm the system at predefined times and days.
Simple automatic setup on the Memory Card defines the image quality mode, camera visual parameters, frame rate & number of frames per event.
2 recording modes
Fixed - Records events until the MemoryCard is full.
Cyclic - Records events successively, overriding old data when the Memory Card is full.
Image Integrity
Each image is digitally signed & can be authenticated.
The fully functional PIR can be connected to an external control panel.
The 3 color-coded LEDs indicate the status of the unit.
3 Dry Contact Inputs for external triggers.
2 Relay Outputs.
JPEG Compression Format.
4 recording qualities - Good, great, better, best.
Image size: 5-20KB per image.
Current Consumption: 20mA per hour in sleep mode. Achieves 3 days of power with a 1.2amp battery. When triggered uses 450-500mA per hour.
Unit dimensions(mm): 67 x 135 x 56 (W xH x D)
Weight: 250g
Minimum System Requirements
Pentium II - 200Mhz
16MB RAM
Super VGA or higher graphics card
Windows 95, 98, 2000, ME, NT or XP
 |
