Dakota Alert Alarm Kit, (1) IR-3000 and (1) WR-3000

• Infrared Sensor
• Three Different Sensitivity Settings
• Low Battery Alert
• Designed for Indoor or Light Duty Outdoor
• Four Different Tones
• Volume Control

The passive infrared detector is able to monitor an area up to 100° wide. With the integral mask, the detection area can be narrowed down to 20° or anywhere in between. With the swivel mount, the IR-3000 sensor can be adjusted right to left up to 80° and up and down up to 50°. With three different sensitivity settings, the IR-3000 can detect a person up to 12 feet, 25 feet or 40 feet away.

The sensor can also be set to flash an LED or stay dark when a signal is sent. The IR-3000 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery.

The IR-3000 is designed for indoor or light duty outdoor applications under an eave or awning or other protected locations.

The WR-3000 is the receiver for the IRWR-3000 system. The WR-3000 plugs into a standard wall outlet and can be placed on a table or ounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The WR-3000 is equipped with four form "C" relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.