Wireless Rubber Hose Alert

• Driveway Alarm
• Weatherproof

The WRH-3000 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the WR-3000 receiver up to 600 feet away.

The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver.

The WR-3000 is the receiver for the WRH-3000 system. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.

The WR-3000 is equipped with four form "C" relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.

Transmitter Specifications:

• Transmitter Size: 5"x5"x3"
• Frequency: 433.92 MHz
• Code Combinations: 256
• Wireless Range: 3000 feet
• Battery Type: 9-volt alkaline (not included)
• Hose Length: 25 feet

Receiver Specifications:

• Size: 6" x 3.5" x 1.5"
• Frequency: 433.92 MHz
• Zones: 4
• Code Combinations: 256
• Relay Outputs: 4 form "C"
• Voltage Input: 12 VDC
• Voltage Output: 12 VDC 400 mA maximum