Motion Sensor

Wireless Communication
The Wireless Detection Units' use a wireless Radio Frequency (RF) to communicate with the Master Alarm Unit.

Panic Button
On the top of every Wireless Detection Unit is a large red button that functions the same as the one on the Master Alarm Unit. Pressing the panic button will immediately transmit a wireless signal to the LaserShield^® Master Alarm Unit and an alarm will be activated, notifying the 24 x 7 Rapid Response Monitoring Service.

Power Connection
The Wireless Detection Unit requires a power connection. There is no need for a phone line.

Bypass Button
A bypass button and indicator light is located under the motion sensor on the front of the unit. This button enables the user to bypass a bedroom Wireless Detection Unit at night. A small amber light will flash indicating the unit is in bypass mode. The bypass button does not affect the function of the panic button.

Battery Back-Up
The battery will provide up to 12 hours of back-up power.

Pet Friendly
A unique Pet Shield instantly snaps into place on the front of the LaserShield^® motion detector on the Wireless Detection Unit. The Pet Shield blocks portions of the motion sensor so your pet is less likely to trigger an alarm.