Oscor Omni Spec. Correlator

Portable & Programmable Counter Surveillance Unit Detects All Bugs

• Detects Audio/Video Carrier Current & Infrared RF Devices
  
• Automatically Stores Encountered Signals In Memory
• Sonic Ranging & Triangulation To Pinpoint Bug Lcations
• Built-In Spectrum Analyzer

Complete Eavesdropping Detection Station
The Oscor Omni Spectral Correlator is the only package you need to debug and locate all audio and video RF bugs. This complete eavesdropping detection package is portable and completely programmable to fit your RF bug detection needs. With a custom designed built-in spectrum analyzer, this device detects all major types of audio and video including carrier current and infrared. This device automatically stores encountered signals in the memory. With 24/7 protection against eavesdropping, the Oscor Correlator is the most reliable and cost effective bug detection device on the market.

Sonic Ranging & Triangulation
Sonic ranging and triangulation to pinpoint bug locations. Using the Patented Threat Locating System, a bugging device can be readily found with no destructive searches. The Triangulate and Locate option uses sonic ranging to locate a threatening microphone.

Automatic Threat Correlation
The patented OSCOR Correlator provides signal classification by correlating the demodulated audio of a received signal to the ambient noises of an environment.

Automatic Signal Scanning and Logging
Only the OSCOR provides an automatic solution to rapidly logging and classifying all the signals of your environment. A quick reference guide provides a single chart that completely defines the programming process. Sonic ranging and triangulation to pinpoint bug locations. Using the Patented Threat Locating System, a bugging device can be readily found with no destructive searches. The Triangulate and Locate option uses sonic ranging to locate a threatening microphone.

Signal Analysis
The OSCOR provides detailed signal analysis capabilities with a complete built-in suite of audio demodulators and IF bandwidth selections. The audio demodulators include FM wideband, FM narrowband, AM wideband, AM narrowband, Sub-carrier, Single Sideband, and IF bandwidths 250 kHz, 15 kHz, and 6 kHz. Built-in video monitors display images received on transmitted signals for protection against covert video transmitters. Supported video formats include NTSC, PAL, and SECAM. This feature is not included in the basic unit.

Built-In Antenna & Printer For Improved Counter Surveillance Capabilities
Built-in automatically switched antenna array. Foldout antenna panel automatically selects the proper antenna with no connections required. Pre-amp provides maximum sensitivity for the proper input. No unreliable cable connections or mismatched antenna inputs. The Oscor also features a built-in printer for hard copy printouts. The OSCOR built-in thermal printer provides a user with the ability to generate printouts of important sweep data. Removable Program chip for ease of upgrading software.

Easy To Navigate PC Interface For Generating Professional Reports & Graphs
PC Interface and Remote Control of the OSCOR. The OSCOR PC interface software provides the capability to create permanent database profiles of sweep environments, generate professional reports and graphs.

Features:

• Detects audio and video RF bugs (carrier current & infrared)
• Built-in spectrum analyzer for storing all encounters to the memory for later review
• Sonic ranging and triangulation to pinpoint bug locations
• Detailed signal analysis capabilities
• Automatically switched antenna array for maximum sensitivity
• Built-in printer for hard copy printouts
• Removable program chip for ease of software upgrade
• Easy to navigate PC Interface

RF System:

• RF Receiver Type: Quad Conversion Super Heterodyne with 3 phase locked loop synthesizers
• RF Frequency Coverage: 10kHz-3GHz
• Tuning Resolution: 100Hz
• Sensitivity: 0.8µV typical with 15kHz Bandwidth (+15dBm MAX)
• Demodulators: AM, FM Wide, FM Narrow. FM SC, SSB/CW
• IF Bandwidth: 250kHz, 15kHz, 6kHz
• Attenuators: 0, -20dB at active whip, Discone, and VLF-MF input
• Dynamic Range: 90dB
• Subcarrier Tuning Range: 15kHz-250kHz
• Antenna Types: Balanced Loop 10kHz-500kHz (35-45kHz Narrow)
• Active Whip: 500kHz-1500MHz
• Discone: 1500MHz-3000MHz
• Infrared Detector: 10kHz-5MHz, 850-1070nM
• AC Carrier Current: 10kHz-5MHz (Balanced Across Power Line)

Control System:

• 8/16 Bit Microcontroller
• 128 (512K Optional) Static RAM Memory
• Optical Encoder: 128 Pulse/Rev with variable count ratio
• Program Key: 64K Byte ROM
• Display: 128 x 256 Segment Graphics Supertwist LCD
• Printer: 192 Dot Per Line Graphics on 2

Audio System:

• Frequency Response: 50Hz-15kHz
• Voiceband Filter: 300Hz-3000Hz -18dB/Octave
• AGC Dynamic Range: 60dB
• Output Power: 3W @ 4
• Headphone Output: 0-2V rms @ 220
• Record Output: 50mV rms (with AGC) @ 500
• Remote contact: Normally Open (200mA 32V MAX)
• Balanced Auxiliary Input: 0.5V rms Nominal @ 600
• Reference Audio Input: 1mV - 1V rms @ 3.9K
• Sonic Correlator: 50Hz - 15kHz (Frequency Independent)
• Audio Alarm: 3 Level Programmable Two Tone Ringer
• Squelch: Automatic digital or manual control over full display range
• Headphones: Low acoustic leakage, output limited to 105dBA

Power System:

• AC Input: 105-130/210-260VAC, 50-60Hz, 24W
• External DC Input: 12-l8VDC, 1A max
• Internal Battery: 12.6V, 2.9 Ah 3 hour operation per charge typical

Includes:

• OSCOR Triangulate and Locate
• OSCOR Video Option (Multiple formats): Allows the OSCOR to provide viewing of video signals. Used for detection of covert surveillance cameras. Supports NTSC, PAL and SECAM. Includes a video demodulator circuit board that must be installed in the OSCOR main unit and two video monitors that fit inside the OSCOR storage Compartment. Includes OVP-5000.
• OSCOR Video Patch Cord: Patch cord that allows received video signals to be fed directly into an alternate video monitor or a video recorder. Video output is provided in a standard RCA plug.
• OSCOR Audio Recorder and Cables: Audio micro-cassette recorder that connects directly into the connector tray to use the OSCOR audio recorder functions.
• OSCOR Extra Memory (512K): Increases the OSCOR signal storage capability from 7,168 signals to 28,672.
• Locator Probe Extension Cable: BNC cable that is identical to the locator probe cable. Comes with barrel connector and provides extension for the Locator Probe.
• Miniature Microphone: Used with the standard OSCOR cables to provide a remote microphone input.
• OSCOR Multiple Purpose Cable: 12’ Cable with 3.5mm male and 3.5mm female connectors. Used to extend Loop Antenna range, OSCOR Telephone Coupler and options MIC-5000.
• Modular Phone Adapter: Provides easy access to telephone conductors for testing. Universal connector works for 2,4,6 & 8 conductor telephone systems.
• Cigarette Lighter Adapter: Provides DC input to power the OSCOR from an automobile cigarette lighter.

Size:

• 6 1/2" x 18 1/2" x 14 1/2"