Tripp Lite DHPV2000FC

2000w DC AC Inverter

  • Diagnostic LEDs indicate load level and battery charge
  • Peak surge output: OverPower (up to 1 hour) 3000W, Double-Boost (up to 10 seconds) 4000W
  • Converts 12V DC battery power to 120V AC power
$640.15
SKU: PV2000FC PV2000FC-1944
  • Limited Quantities - Ships Today!
  • Easy Returns
  • Ships via Ground at a Special Flat Rate
2000w DC AC Inverter
  • Diagnostic LEDs indicate load level and battery charge
  • Peak surge output: OverPower (up to 1 hour) 3000W, Double-Boost (up to 10 seconds) 4000W
  • Converts 12V DC battery power to 120V AC power
Overview

The PV2000FC Industrial-Strength 2000w Dc AC Inverter offers 2 outlets and up to 2000W of continuous output from a vehicle’s battery or a 12V external battery bank, making it perfect for a work truck with industrial equipment (e.g. power tools, electric motors). Its highly efficient operation can handle peak load requirements for equipment with high-current startup needs—up to 200% of its rated capacity. Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 2000W of 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a set of high-current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors and other inductive loads with high-current startup needs. Built-in RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4).

Specifications

Brand:

SKU: PV2000FC

In The Box
PV2000FC Inverter
Instruction manual


Special Feature: Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on.

Dimensions: 7.25" x 8.5" x 16.2"

Power: 12V DC input; 120V AC output

Transmission: Frequency Compatibility: 60 Hz

Service: No monthly fee

Output

 Nominal Output Voltage(s): Supported 120V
 Frequency Compatibility: 60 Hz
 Output Receptacles: (2) 5-15R
 Pure Sine Wave Output: No
 Output (Watts): 2000
 Continuous Output Capacity (Watts): 2000
 Peak Output Capacity (Watts): 4000
 Output Voltage Regulation: Maintains PWM sine wave output voltage of 120 V AC (+/-5%)
 Output Frequency Regulation: 60 Hz (+/- 0.3 Hz)
 Overload Protection: Circuit breaker

Input

 Recommended Electrical Service:
 Requires 12V DC input source capable of delivering 200A for the required duration (when used at full capacity).
 For automotive applications, professional hardwire installation with 400A battery system fusing is recommended.
 Maximum Input Amps / Watts:
 Full continuous load - 200A at 12V DC
 No load - 2.2A at 12V DC
 Input Connection Type: Set of 2 DC bolt-down wiring terminals
 Input Cord Length: 3 ft
 Voltage Compatibility (VDC) 12

User Interface

 Front Panel LEDs Set of 6 LEDs offers continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported).

Physical

 Cooling Method Fan
 Material of Construction: Polycarbonate
 Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

Battery

 DC System Voltage (VDC) 12

Environmental

 Relative Humidity 0-95% non-condensing

Certifications

 Certifications Meet UL458 (USA, Canada), RoHS Compliant

Reviews
Write a review about this product
FAQ's

Customers Also Viewed