The TS-EC1280U-E3-4GE-R2-US R2 12-Bay Unified NAS Enclosure from QNAP quickly takes care of your enterprise data storage needs by featuring two 10GbE SFP+ ports and 12 bays, which can each house a 2.5" or 3.5" SATA III hard drive or SSD. It sports a quad-core 3.5 GHz Intel Xeon E3-1246 v3 processor and 4GB of DDR3 ECC memory to run iSCSI and virtualization applications as well as the QTS operating system. You can configure your drives in a RAID 0, 1, 5, 6, or 10 modes to enhance the drive's reads and writes while preserving data in the event a drive fails. To increase I/O throughputs, QNAP has outfitted this enclosure with two mSATA slots so you can install flash modules for caching data. Aside from that, four Gigabit Ethernet ports are on board to serve a large number of simultaneous connections.
The QNAP 12-Bay 10GbE iSCSI NAS Intel Core E3 Redundant PSU can reach a throughput of up to 3,500+ MB/s and 390,000+ IOPS. Powering and cooling these features are accomplished by two redundant 400W PSUs and four 60mm fans. Using the four USB 3.0 and four USB 2.0 ports, this QNAP NAS can be connected to other external drives. For safeguarding your data, this enclosure encrypts your data with FIPS 140-2 AES 256-bit encryption. Aside from data protection, it supports SMB/CIFS, NFS, and AFP protocols for file sharing across Windows, Mac, and Linux/UNIX networks. In addition, you can meet future data needs by cascading optional QNAP RAID expansion enclosures to the TS-EC1280U R2 NAS enclosure.
In The Box
4x Ethernet cable
48x Flat head screw (for 2.5" HDD)
48x Flat head screw (for 3.5" HDD)
2x Power cord
Quick Installation Guide
Special Feature: The TS-EC1280U-E3-4GE-R2-US R2 supports various business applications as an all-in-one Turbo NAS with cost-efficiency.
Dimensions: 3.46" x 17.42" x 20.89"
Power: Redundant power:Input: 47-63 Hz; 100-127V~/ 8A; 200-240V/ 4AOutput: 400W
Transmission: 2x mSATA port on board for read caching4x GbE ports 40GbE is optional 2x 10 GbE SFP+ ports (LAN-10G2SF-MLX) 4x USB 3.0 port (rear)4x USB 2.0 port (rear)
Storage: 12x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive hot-swappable and lockable tray
Service: No monthly fee
CPU: 3.5 GHz Xeon E3-1246 v3 CPU
Memory: System memory: 4 GB DDR3 ECC RAM
Memory module (pre-installed): 2 x 2 GB, Total memory slots: 4
Memory expandable up to: 32 GB (4 x 8 GB)
Flash Memory: 512 MB DOM
Internal Cache Port: Two built-in mSATA ports for read caching (separately sold)
Hard Drive:12 x 3.5" SATA III 6 Gb/s and SATA II 3 Gb/s hard drives or 2.5" SATA III 6 Gb/s and SATA II 3 Gb/s hard drives and SSD drives
Note: Please be aware that the system ships without an HDD.
Hard Disk Tray: 12 x hot-swappable and lockable trays
LAN Port: 2 x 10 GbE (SFP+), 4 x GbE, 40 GbE is supported
LED Indicators: Status, 10 GbE, LAN, eSATA, storage expansion port status
USB: 4 x USB 3.0 port (Rear), 4 x USB 2.0 ports (Rear)
Supports USB printers, pen drives, USB hubs, and USB UPS etc.
Buttons: System: Power button and reset button
Alarm Buzzer: System warning
Form Factor: 2U, Rackmount
Sound Level: Sound pressure (LpAm): 55.3 dBA
PCIe Slots: 2 (Right Slot: 1 x PCIe Gen3 x8, Left Slot: 1 x PCIe Gen3 x4)
Fan: 4 x 6 cm smart cooling fan
Power Consumption: Sleep mode: 80.41 W
In Operation: 166.58 W (with 12 x 1TB hard drives installed)
Power Supply: Redundant power
Input: 47 to 63 Hz, 100 to 127 VAC / 8 A, 200 to 240 VAC / 4 A
Output: 400 W
Operating System: QTS (QNAP Turbo NAS System)
Windows Server 2003 onward
Apple Mac OS X onward
Linux, and UNIX
Internet Explorer 10+
Mozilla Firefox 8+
Apple Safari 4+
Temperature: 32 to 104°F / 0 to 40°C
Relative Humidity: 5 to 95% non-condensing
Wet Bulb: 81°F / 27°C