Kellie Kendall Apr 15th 2024

GPS Tracker How-To Guide

GPS Tracker Installation Guide: How to Install a Hardwired GPS Tracker

Installing a hardwired GPS tracker in your vehicle is a straightforward car tracker installation process that can be completed in about 15 minutes. Here's a step-by-step guide to help you through the installation.

Tools

No special tools are required.

Step-by-Step Car Tracker Installation Guide

STEP 1

Turn off your car's ignition

Ensure no electrical power is flowing while you connect your GPS tracker to your car.

STEP 2

Remove the panels and covers of your car's lower dash

Access the wiring by removing the panels and covers under your steering wheel.

STEP 3

Locate the ignition wire and the constant power wire

These wires are connected to your car's ignition switch. Ensure that the installation does not interfere with the vehicle's electrical system to maintain proper functionality. Refer to your car manufacturer's wiring diagram to identify the correct wires. Connect the wires according to the instructions in your GPS tracker installation guide. Use electrical tape to secure and insulate the connections to prevent short circuits.

STEP 4

Place your GPS tracker near or around the ignition coil

Position the tracker so that it's not covered by metal to ensure a strong signal. A clear GPS signal is crucial for accurate tracking, so avoid placing the tracker in areas where the signal might be obstructed. Place the module upwards with the label facing downwards for optimal performance. This placement helps the GPS tracking device to receive signals effectively and provide accurate location data. Reattach the panels and covers of your car's lower dash securely.

STEP 5

Test Drive

Take your vehicle for a 10-15-minute test drive. This helps the tracker establish a GPS connection.

STEP 6

Use the provided login credentials to access your GPS tracker's monitoring platform.

STEP 7

Check Tracking Results

After logging in, review the tracking reports from your test drive to ensure everything is working correctly.

Tips for a Successful GPS Tracker Installation

Double-check your wiring: Incorrect connections can lead to malfunctions.
Ensure a clear signal: Avoid placing the tracker under metal surfaces.
Consult the manual: Always refer to your GPS tracker's installation guide for specific instructions.
Consider using the car's OBD-II port for a plug-and-play installation if you prefer a simpler setup.
Wireless trackers offer flexibility and ease of installation, making them a good option for those who frequently change vehicles.

By following these steps, you can successfully install your hardwired GPS tracker and start monitoring your vehicle's location in real-time. If you encounter any issues, don't hesitate to reach out to our support team for assistance.

Stay safe and happy tracking!

Feel free to contact us at BrickHouse Security if you have any questions or need further assistance with your GPS tracker installation.

FAQ

Can I install a hardwired GPS tracker myself, or should I get professional installation?

If you have basic technical knowledge and are comfortable working with your vehicle's wiring, you can successfully install a hardwired GPS tracker yourself. However, for more complex vehicles or if you're unsure about identifying the correct wires, professional GPS installation might be the safest choice.

How do I ensure my GPS tracker has a strong signal?

To maintain a strong GPS signal, install the tracker in a location that isn't blocked by metal, such as under the dashboard but away from the steering wheel. Avoid placing the tracker near other devices that might interfere with the GPS signal.

Will installing a GPS tracker drain my car's battery?

A properly installed GPS tracker draws minimal power and shouldn't drain your vehicle's battery. Make sure to connect it to the correct constant power wires and check the manufacturer's instructions to ensure it's set up for energy efficiency.

What's the difference between a hardwired GPS tracker and a plug-and-play tracker?

A hardwired GPS tracker connects directly to your vehicle's electrical system, offering a discreet and secure installation, ideal for long-term use and fleet vehicles. A plug-and-play tracker simply plugs into your car's OBD II port and is easier to install but can be easily removed or detected.

How do I hide the GPS tracker for better security?

For discreet car tracker installation, place the device under the dashboard or behind interior panels. Use zip ties to secure the wiring and electrical tape to conceal the connections. Avoid locations where metal might block the GPS signal or interfere with the device.

How can a hardwired GPS tracker help reduce fuel costs?

Hardwired GPS trackers provide valuable data on driving habits, vehicle location, and idle times. Fleet managers can use this information to optimize routes and reduce unnecessary fuel consumption, ultimately lowering fuel costs.

Learn More About GPS Tracking How-To Guides

How to Install an OBD II Port GPS Tracker How to hide a GPS tracker under the car How to hide a GPS tracker inside the dashboard How to pick the best GPS tracker How to find a GPS tracker by Inspecting the Interior How to find a GPS tracker by Inspecting the Exterior of the Vehicle How to find a GPS tracker using a Bug Detector How to find a GPS tracker by hiring a installer How to Use a GPS Tracker How to Place a Battery Operated GPS Tracker

Ready to install your GPS tracker? Explore our full range.

Shop Hardwired Trackers Professional Installation

Posted by Kellie Kendall on Apr 15th 2024

Kellie Kendall

Kellie joined the BrickHouse team in 2021 with an impressive 28-year career in sales, primarily focused on the automotive industry. Kellie brings extensive expertise and a dynamic approach to the GPS sales team. She manages key accounts, including Amazon, Nordstrom, Saks Fifth Avenue, and various law enforcement agencies, consistently demonstrating her commitment to going to bat for her customers.

Born and raised in Southern California, Kellie's vibrant and engaging personality shines in and out of the workplace. She is an avid gardener who enjoys camping and travelling, exploring new landscapes and experiences that enrich her personal and professional life. Kellie is also a proud aunt to twin niece and nephew and a devoted mother to her furry four-legged friend, Halo.

Kellie’s broad range of interests and professional acumen make her a valuable asset to the BrickHouse team. She enhances client relationships and drives successful outcomes.