The Sony 7" Outdoor Pendant Housing protects a Sony SNC-RX series or SNC-RZ25N PTZ network camera in an outdoor location. The housing features a built-in heater and blower system to shield the camera from the cold and to keep the viewing window from fogging up in high humidity. A built-in 12VDC camera power adapter allows the use of a single power cable to power both the housing and the camera inside. It also comes with a 7" polycarbonate tinted lower dome, a quick connect 1-1/2" NPT coupling, a controlled thermostatic blower and heater, and a pendant style design.
It is manufactured from a high-impact engineered plastic, UV protected, with a UL flame rating of 94V0. The dome is made of an injection molded, 3mm thick, optically clear thermoplastic polycarbonate. The blower draws 1.4W continuous power. The 25W heater shall turn on at 50° F (10° C) and turn off at 77° F (25° C). The housing shall support a temperature range of -20° F (-29° C) to 122° F (50° C).
Power: Housing Power: 24VACCamera Power: 12VAC
Special Feature: This UNI-ONL7T2 Outdoor Pendant Housing is designed to be used with the SNC-RH/RS, EP/ER, W Series indoor PTZ Cameras.
Heater and Blower: 24VAC, 27 Watts
Camera: 24VAC, 25 Watts
Upper Housing: 0.08" (2.0mm) plastic top, 94VO flame rated, and UV protected
Lower Dome: 0.118" (2.99mm), optically clear, thermoplastic polycarbonate
Mounting Brackets: Cast or machined aluminum
Operating Temperature: -20deg.F (-29deg.C) to 122deg.F (50deg.C)
Heater Activates At: 50deg.F (10deg.C), deactivates at 77deg.F (25deg.C), 24VAC, 25W
Blower: Continuous operation
Dimensions (H x W x D): 10.3 x 10.3 x 15" / 261.62 x 261.62 x 381mm
Weight: 7lbs / 3.17kg (without camera)