The ACTi I96 features a 30x zoom lens, 2 megapixels with 1080p, and extreme Wide Dynamic Range of 107dB. The I96 uses a Progressive Scan CMOS image sensor and captures Full HD images at a resolution of up to 1920x1080. The camera performs well even under a minimum illumination of 0.1 lux, making it suitable for use in low-light conditions. This camera is weather resistant (IP66 rated) and vandal proof (IK10 rated) and comes with terminal blocks that can be used when an external power adapter and a digital input or output device is required to be connected. With the selectable H.264 and MJPEG compression formats, this camera makes sure you use less bandwidth and storage space.
Brand: ACTi
SKU: I96
In The Box
Camera
Screws
Power Adapter or Injector
Universal Converter
Cable Gland
Conduit Gland
2x Gland Rubber Rings
Hex Screwdriver
Safety Strap
2x DI/DO Terminal Blocks
Quick Installation Guide
Warranty Card
Special Feature: The ACTi I96 is suitable for use in low-light conditions.
Dimensions: 7.9" x 10.9"
Power: High PoE (IEEE802.3at) / 25.44 W (built-in heater and fan on)
Transmission: Ethernet (10/100 Base-T), RJ-45 connector
Storage: MicroSDHC/MicroSDXC memory card, NVR
Service: No monthly fee
Image Sensor: Progressive Scan CMOS
Horizontal Resolution: 1800 TVL
Day / Night: Yes
Low Light Sensitivity: Extreme
IR Sensitivity Range: 700-1100nm
Horizontal Viewing Angle: Zoom, f4.3-129mm
Vertical Viewing Angle: F1.6-F5.0
Max. Frame Rate vs. Resolution: 30 fps at 1920x1080, 30 fps at 1280x720, 30 fps at 800x600, 30 fps at 640x480, 15 fps at 320x240
Image Orientation: Flip, Mirror
Network Protocol & Service: IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X
Ethernet Port: 1 x RJ-45 connector
Wireless: No
Security: IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control
Event Trigger: Video motion detection (3 regions), External device through digital input, Sound detection
Event Response: Notify control center, Go to PTZ preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Play the audio file, Push notification to mobile device, Save video to local storage, Upload video or snapshot to FTP server, Upload video to NVR server, Activate external device through digital output
Local Storage: MicroSDHC, MicroSDXC memory card slot (card not included)
Power Source: AC 24V, High PoE
Power Consumption: 25.44 W (PoE)
Weight: 2500g (5.51lb)
Dimensions: (⌀ x H): 200mm x 276mm (7.9" x 10.9")
