The EV-L1R2409 is a 2.4GHz Digital FHSS Wireless Vandal Proof Corner Mount Elevator Video System that transmits high-quality 720 x 480 video up to 200 floors. It comes with a 650-line vandal-proof corner mount CCD camera. An embedded 2-Wire RS-485 PTZ / Data Control and 9-CH FHSS digital immunity to signal interference are few of its features, making it the most economical elevator surveillance solution.
This 2.4GHz Corner Mount Elevator Video System offers convenient on-screen display signal strength indicator, and power & video loss indicators for trouble-free installations. No connections to the elevator mechanics or traveling cable are needed and, no maintenance or inspections is required. It is perfect for identifying, monitoring and recording employees and residents while deterring vandalism and unwanted visitors.
Brand: Videocomm Technologies
In The Box
Wireless Video Receiver
Universal Mounting Bracket
Quick Start Guide
Special Feature: The 2.4GHz Corner Mount Elevator is the most economical solution to deter vandalism and other criminal behavior anytime, anywhere.
Dimensions: Video Enclosure: 7" x 7" x 4", Antenna: 7.8" x 5.15"
Power: Power Supply Included: 12VDC 1250mA UL-Listed Power Supply
Transmission: Operating Frequency: 5.185GHz - 5.825GHz
Service: No monthly fee
Operating Frequency: 2.4GHz - 2.48GHz FHSS
Modulation: FHSS Automatic 9-Channel
Security Authentication System: Automatic Rolling Encrypted Authentication
Latency: 200-500ms (Signal Dependant)
Video Compression: Hardware-Based MPEG-4
Resolution: Maximum D1 720 x 480 (Camera 650 lines)
Range & Elevation (Line of Sight): Up to 200 Floors
Camera Type: 1/3" Color SONY # CCD-S650EV
Camera Lens Type: Board Lens 2.8mm @ F2.0
Camera S/N Ratio: >48dB (Auto Gain Control OFF)
Camera Minimum Illumination: 0.4 Lux @ F1.
Antenna Type: External OmniDirectional Rubber Duck
Video Connector: BNC-Female @ 75 Ohms 1 Volt P-P
Audio Connector: BNC-Female @ 600 Ohms 1 Volt P-P (Camera has no Audio)
Power Supplies Included: 2x 12VDC 1.25Amp CE UL Listed #PS-121C
Camera Power Connector: Siamese Power / Video Cable included
Tx & Rx Operating Voltage: 9-15VDC - Polarity & Surge Protected
Camera Current Consumption: <130mA @ 12VDC
Tx & Rx Current Consumption: 500mA @ 12VDC
Camera Construction: Vandal-Proof IP-66 Aluminum Design
Tx & Rx Construction IP-67 Rated All-Weather Design
Camera Weight: 300g (0.6Lbs) approx
Tx & Rx Weight: Tx: 29oz (820g) Rx: 31oz (890g)
Tx & Rx Mounting Brackets: Universal Stainless Steel Wall / Pole Mount
Operating Temperature Range: -40°F to +170°F (-40°C to 77°C)
FCC / IC Approved: Yes - Professional Installation