QNAP TS-EC1680U-i3-4GE-R2-US

QNAP 16-Bay 10GbE iSCSI NAS Intel Core i3 Redundant PSU

  • Discontinued - Call for Alternative
  • 16 x 3.5" or 2.5" SATA III Drive Bays
  • 3.5 GHz Intel Core i3-4150 Dual-Core
  • 4GB of DDR3 RAM
SKU: TS-EC1680U-i3-4GE-R2-US TS-EC1680U-i3-4GE-R2-US-2089
  • Out of Stock
  • Easy Returns
  • Fast Free Shipping on Orders Over $50

QNAP 16-Bay 10GbE iSCSI NAS Intel Core i3 Redundant PSU
  • Discontinued - Call for Alternative
  • 16 x 3.5" or 2.5" SATA III Drive Bays
  • 3.5 GHz Intel Core i3-4150 Dual-Core
  • 4GB of DDR3 RAM

The TS-EC1680U-i3-4GE-R2-US 16-Bay Unified NAS Enclosure from QNAP quickly takes care of your enterprise data storage needs by featuring two 10GbE SFP+ ports and 16 bays, which can each house a 2.5" or 3.5" SATA III hard drive or SSD. This enclosure sports a dual-core 3.5 GHz Intel Core i3-4150 processor and 4GB of DDR3 ECC memory to run iSCSI and virtualization applications as well as the QTS operating system. You can configure your drives in a RAID 0, 1, 5, 6, or 10 modes to enhance the drive's reads and writes while preserving data in the event a drive fails. To increase I/O throughputs, QNAP has outfitted this enclosure with two mSATA slots so you can install flash modules for caching data. Additionally, four Gigabit Ethernet ports are on board to serve many simultaneous connections.

The TS-EC1680U R2 can reach a throughput of up to 3,500+ MB/s and 390,000+ IOPS. Powering and cooling these features are accomplished by two redundant 650W PSUs and four 80mm fans. Using the four USB 3.0 and four USB 2.0 ports, this QNAP NAS can be connected to other external drives. For safeguarding your data, this enclosure encrypts your data with FIPS 140-2 AES 256-bit encryption. It supports SMB/CIFS, NFS, and AFP protocols for file sharing across Windows, Mac, and Linux/UNIX networks. In addition, you can meet future data needs by cascading optional QNAP RAID expansion enclosures to the TS-EC1680U R2 NAS enclosure.



SKU: TS-EC1680U-i3-4GE-R2-US

In The Box
4x Ethernet cable
64x Flat head screw (for 2.5" HDD)
64x Flat head screw (for 3.5" HDD)
2x Power cord
Quick Installation Guide

Special Feature: This QNAP 16-Bay 10GbE iSCSI NAS Intel Core i3 Redundant PSU is especially useful for large data applications, such as video surveillance, data archiving, TV broadcast storage, and more.

Dimensions: 5.12" x 17.42" x 20.89"

Power: Redundant power:Input: 50-60 Hz; 100-127V~/ 8.5A; 200-240V/ 4.2AOutput: 650W

Transmission: 2x mSATA port on board for read caching4x GbE ports 40GbE is optional 2x 10 GbE SFP+ ports (LAN-10G2SF-MLX) 4x USB 3.0 port (rear)4x USB 2.0 port (rear)

Storage: 16x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive hot-swappable and lockable tray

Service: No monthly fee


 CPU: 3.5 GHz Core i3-4150 CPU
 Memory: System memory: 4 GB DDR3 ECC RAM
 Memory module (pre-installed): 2 x 2 GB
 Total memory slots: 4
 Memory expandable up to: 32 GB (4 x 8 GB)
 Flash Memory: 512 MB DOM
 Internal Cache Port: Two built-in mSATA ports for read caching (separately sold)
 Hard Drive: 16 x 3.5" SATA III 6 Gb/s and SATA II 3 Gb/s hard drives or 2.5" SATA III 6 Gb/s and SATA II 3Gb/s hard drives and SSD drives
 Note: Please be aware that the system ships without an HDD
 Hard Disk Tray: 16 x hot-swappable and lockable trays
 LAN Port: 2 x 10 GbE (SFP+), 4 x GbE
 LED Indicators: Status, 10GbE, LAN, eSATA, storage expansion port status
 USB: 4 x USB 3.0 port (Rear), 4 x USB 2.0 ports (Rear)
 Supports USB printers, pen drives, USB hubs, and USB UPS etc.
 Buttons: System: Power button and reset button
 Alarm Buzzer: System warning
 Form Factor: 3 RU, Rackmount
 Sound Level: Sound Level (dB) Sound pressure (LpAm) (bystander position): 40.5 dBA (with 16 x HITACHI HUS724020ALA640 hard drive installed)
 Temperature: 32 to 104°F / 0 to 40°C
 Relative Humidity: 5 to 95% non-condensing
 PCIe Slots: 2 (Right Slot: 1 x PCIe Gen3 x8, Left Slot: 1 x PCIe Gen3 x4)
 Fan: 4 x 8 cm smart cooling fan


 Power Supply:
 Input: 50 - 60 Hz, 100 to 127 VAC / 8.5 A, 200 to 240 VAC / 4.2 A
 Output: 650 W
 Power Consumption:
 Sleep mode: 82.4 W
 In Operation: 166.58 W (with 16 x HITACHI HUS724020ALA640 hard drive installed)


 Operating System: QTS (QNAP Turbo NAS System)
 Supported Clients
 Windows Server 2003 onward
 Apple Mac OS X onward

Supported Browsers

 Google Chrome
 Internet Explorer 10+
 Mozilla Firefox 8+
 Apple Safari 4+

File System

 Internal hard drive: EXT4
 External hard drive: EXT3, EXT4, NTFS, FAT32, HFS+


 TCP/IP (IPv4 & IPv6: Dual Stack)
 Quad Gigabit NICs with Jumbo Frame
 Multi-IP Settings
 Port Trunking/NIC Teaming (Modes: Balance-RR, Active Backup, Balance XOR, Broadcast, IEEE 802.3ad/Link Aggregation, Balance-TLB, and Balance-ALB)
 Service Binding Based on Network Interfaces
 Proxy Client, Proxy Server
 DHCP Client, DHCP Server
 Protocols: CIFS/SMB, AFP (v3.3), NFS (v3), FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, and SMSC
 UPnP & Bonjour Discovery
 USB Wi-Fi Adapter Support


 IP Filter & Policy-based Automatic IP Blocking
 Network Access Protection with Auto-blocking: SSH, Telnet, HTTP(S), FTP, CIFS/SMB, AFP
 Encrypted Access: HTTPS, FTP with SSL/ TLS (Explicit), SSH/SFTP (admin only), Encrypted Remote Replication (Rsync over SSH)
 CIFS Host Access Control for Shared Folders
 Antivirus Protection
 FIPS 140-2 Validated AES 256-bit Volume-based Data Encryption
 AES 256-bit External Drive Encryption
 Importable SSL Certificate
 Instant Alert via E-mail, SMS, Beep, and LCD Panel

Write a review about this product

Customers Also Viewed